Connecting The Digibino And Pc; Viewing Images On Your Pc; Disconnecting The Digibino From Your Pc - Pentax Digibino DB 100 Operating Manual

e08_db100_33e.qk 4/16/02 4:40 PM Page 56

Connecting the DIGIBINO and PC

¡
Turn on your PC.
™
Turn the DIGIBINO off, and connect the PC and DIGIBINO using the
included USB cable.
£
The DIGIBINO is detected as [Removable Disk] in [My Computer].
Memo
Although images can be viewed and printed, image data is on the memory of the DIGIBINO. To
save the image data on the memory to another medium, refer to the instruction manual of your
PC and move or copy files using Explorer, etc.
You can edit images on your PC after moving or copying files there.

Viewing images on your PC

¡
Double click the [ACDSee™ 3.1] icon on the desktop.
™
Select the image to view.
DIGIBINO images can be found in [My Computer]
[xxxPENTX] (xxx is a 3-digit numeral) folder.
56
[Removable Disk] [DCIM]

Disconnecting the DIGIBINO from your PC

To disconnect the DIGIBINO from your PC (Windows2000)
¡
Double click (Hot Plug icon) on the task bar
tray.
The [Unplug or Eject Hardware] screen will appear.
™
Make sure [USB Mass Storage Device] is select-
ed and click [Stop].
[Stop a Hardware device] screen will appear.
£
Make sure [USB Mass Storage Device] is select-
ed and click [OK].
A message will appear.
¢
Click [OK].
∞
Disconnect the USB cable from your PC and
DIGIBINO.
Memo
• For Windows Me, [USB Disk] is displayed instead of [USB Mass Storage Device].
• For Windows 98SE, there is no Hot Plug icon. When removing the DIGIBINO, disconnect the
USB cable.
57