Resuming From The Auto Power Off Status; Resetting To Default Settings (Reset) - Pentax Digibino DB 100 Operating Manual

e07_db100_33e.qk 4/16/02 4:39 PM Page 50

Resuming from the Auto Power Off status

Capture Mode
Close the lens barrier, and then open it, or press the DISPLAY button when the
lens barrier is opened.
Playback Mode
Press the DISPLAY button.
50

Resetting to Default Settings (Reset)

You can reset all the settings other than date style, the date and time and lan-
guage.
¡
Display the [Set-up] menu. (p. 25)
™
Press button to select [Reset].
£
Press button.
The Reset screen will be displayed.
¢
Press button to select [Reset].
∞
Press the OK button.
All settings will be reset, and the DIGIBINO is ready to take a picture.
Rec.Mode Set-up
Video Out NTSC
Auto Power Off 3min
Reset
2/2
OK Ok MENU Exit
Reset
Back to initial settings.
Reset
Cancel
OK Ok MENU Exit
Reset
Back to initial settings.
Reset
Cancel
OK Ok MENU Exit
51