Installing The Software; Connecting The Digibino And Your Macintosh - Pentax Digibino DB 100 Operating Manual

e08_db100_33e.qk 4/16/02 4:40 PM Page 60

Installing the software

The procedures for installing the necessary software are explained.
Memo
There is no need to install the USB driver for Macintosh.
Installing ACDSee™ 1.6
When installing ACDSee™ 1.6, recorded images can be viewed on your
Macintosh.
¡
Turn on your Macintosh.
™
Set the included CD-ROM in the CD-ROM drive of your Macintosh.
£
Double click [English] on the CD-ROM.
Follow the on-screen guidance and enter the registration information and proceed
with the installation.
60

Connecting the DIGIBINO and your Macintosh

¡
Turn on your Macintosh.
™
Turn off the DIGIBINO and connect your Macintosh and DIGIBINO
using the included USB cable.
£
The DIGIBINO is detected as [untitled] on the desktop.
The folder name can be changed as desired.
Memo
Although images can be viewed and printed, image data is on the memory of the DIGIBINO. To
save the image data on the memory to another medium, refer to the instruction manual of your
Macintosh and move or copy files.
You can edit images on your Macintosh after moving or copying files there.
61