Table of Contents
Advertisement
Preparing the Answering System
Programming Summary for the Answering System
You can program the following functions. The display shows the programming
instructions. See the corresponding pages for function details.
Make sure that the handset is on the cradle, the AC adaptor is connected and
the SP-PHONE/HEADSET indicator light is off.
Press {FUNCTION/EDIT}.
Scroll to "TAD program ?" by pressing {
<Function menu>*
Remote code ? . . . . . . . . To set the remote code (p. 49).
Number of rings? . . . . . To select the number of rings (p. 19).
Recording time ? . . . . . To select the caller's recording time (p. 20).
Call screening ? . . . . . To set the call screening feature (p. 20).
––––––––––––––––
During programming
* To select a desired function item, scroll through the items by pressing {
Yes key) to go to the next step.
(
press {OK}
"––––––––––––––––"
•
• You can exit the programming mode any time by pressing {EXIT}.
• If you do not press any buttons for 60 seconds, the unit will exit the programming mode.
18
indicates the end of the function menu.
} or {
} and press {OK} (Yes key).
4
3
4
3
} or {
}. Then
Hide quick links:
Advertisement
Table of Contents
