Table of Contents
Advertisement
TG5511-5521FX(e).book Page 29 Thursday, April 22, 2010 1:24 PM
Special programming
Alarm
An alarm sounds at the set time for 3
minutes once or daily. Alarm can be set
for each handset.
Important:
L Set the date and time beforehand
(page 16).
1
8 i {#}{7}{2}{0}
2
{V}/{^}: Select the desired alarm
option. i M
"Off"
Turns alarm off. Go to step 6.
"Once"
An alarm sounds once at the set
time.
"Daily"
An alarm sounds daily at the set time.
Go to step 4.
3
Enter the desired date and month.
i M
4
Set the desired time. i M
5
{V}/{^}: Select the desired alarm
tone. i M
L We recommend selecting a
different ringer tone from the one
used for outside calls.
6
M i {ic}
L When the alarm is set, E is
displayed.
Note:
L To stop the alarm, press any dial key
or place the handset on the base unit
or charger.
L When the handset is in use, the alarm
will not sound until the handset is in
standby mode.
Programming
Changing the handset name
Each handset can be given a
customised name ("Bob", "Kitchen",
etc.). This is useful when you make
intercom calls between handsets. You
can also select whether or not the
handset name is displayed in standby
mode. The default setting is "Off". If
you select "On" without entering any
handset name, "Handset 1" to
"Handset 6" is displayed.
1
8 i {#}{1}{0}{4}
2
Enter the desired name (max. 10
characters; page 47).
L If not required, go to step 3.
3
M
4
{V}/{^}: Select the desired setting.
i M 2 times
5
{ic}
Changing the unit's region
setting/Resetting the base
unit
1
8 i {#}{1}{3}{6}
2
{V}/{^}: Select the desired country.
i M
countries except
Czech and Slovakia
Czech
Slovakia
3
{V}/{^}: "Yes" i M i {ic}
Note:
L The following items will be deleted or
reset to their default settings:
– SMS settings (page 27)
– Answering system settings
(KX-TG5521, page 26)
– Time Adjustment
29
Advertisement
Table of Contents
