Vcr Mode; Playing Back; Finding A Scene You Want To Play Back - Panasonic NV-GS40 Operating Instructions Manual

VCR Mode

Playing Back

The recorded scene can be played back
immediately after the recording.
1
Rotate the [OFF/ON/MODE] Switch
set the Movie Camera to the VCR Mode.
≥The [VCR] Lamp
(43)
(45)
CAMERA
VCR
CARD
PB
2
Press the [6] Button
tape.
SEARCH
(7)
≥Rewind the tape to the point where you want
to start playback.
≥When the tape reaches the beginning,
rewinding stops automatically.
3
Press the [1] Button
≥The [!] Indication appears.
(8)
BACK
LIGHT
To Stop Playback
Press the [∫] Button
(12)
FADE
ª Adjusting the Sound Volume
Until the [VOLUME] Indication appears, keep
pressing the [PUSH] Dial
[PUSH] Dial to adjust the volume. After the
adjustment, press the [PUSH] Dial to make the
[VOLUME] Indication disappear.
(38)
WB/SHUTTER/IRIS/
MF/VOL/JOG
(43)
(45) lights up.
(7) to rewind the
(8) to start playback.
(12) .
(38) . Then, turn the
PUSH
VCR Mode
To adjust the volume with the Remote Controller,
press the [T] or [W] Button to display the
[VOLUME] Indication. Press the [T] Button to
increase the volume or press the [W] Button to
decrease the volume. The [VOLUME] Indication
goes off a few seconds after the adjustment is
and
finished.
≥The sound volume cannot be adjusted using the
Remote Controller in Playback Zoom Mode.
( )
-33-
≥If a cassette recorded with a copyright
protection signal is played back, the picture is
distorted by mosaic-like patterns.
≥For other notes concerning this item, see
Finding a Scene You Want to Play
Back
ª Cue/Review Playback
SEARCH
(7)
If the [5] Button
pressed during Playback, it turns to Cue Playback
A or Review Playback B.
A
≥If the Button is held continuously, it turns to Cue
Playback or Review Playback until you release
it.
ª Variable Speed Search Function
The speed of Cue Playback or Review Playback
can be varied.
1
During playback, press the [1] Button
≥The [1k!] Indication appears.
(8)
BACK
LIGHT
-30-
BACK
SEARCH
LIGHT
(9)
(9) or [6] Button
B
.
-57-
(7) is
(8) .