Camera Mode; Recording - Panasonic NV-GS40 Operating Instructions Manual

Camera Mode

Recording

When recording with the
[AUTO/MANUAL/FOCUS] Switch
[AUTO], the Movie Camera automatically adjust
the focus and white balance. In some cases, they
cannot be adjusted automatically and need to be
adjusted manually. (
-25-
(47)
≥Before turning on the power, remove the
Lens Cap. If the Lens Cap is still attached
when the power is turned on, Automatic
White Balance Adjustment (
function correctly.
1
Set the [OFF/ON/MODE] Switch
≥The [CAMERA] Lamp
(43)
(45)
CAMERA
VCR
CARD
PB
2
Set the [TAPE/CARD/CARD MODE] Selector
(27) to [TAPE].
CARD
CARD
TAPE
MODE
(27)
3
Press the Recording Start/Stop Button
≥Recording starts.
≥After the [RECORD] is displayed, it changes
to [REC].
(44)
(47)
set to
, )
-26-
AUTO
MANUAL
FOCUS
) may not
-25-
(43)
to [ON].
(45) lights up.
REC
RECORD
Camera Mode
ª Recording Lamp (Tally Lamp)
The Recording Lamp
recording and alerts those being recorded that
recording is in progress.
≥The Recording Lamp does not light up if the
[REC LAMP] on the [OTHER FUNCTIONS1]
Sub-Menu is set to [OFF].
ª To Pause the Recording
Press the Recording Start/Stop Button
again.
The [PAUSE] Indication is displayed.
≥If the Recording Pause Mode continues for
more than 6 minutes, the power is turned off
automatically for tape protection and power
conservation. To resume recording from this
condition, turn off, then turn on the power again.
ª To Check the Recording
By pressing the [S] Button
Recording Pause Mode, you can play back the
last few seconds of the recorded scene.
≥The [CHK] Indication is displayed. After
checking, the Movie Camera resumes the
Recording Pause Mode.
(44) .
-18-
(16) lights up during
(16)
PAUSE
PAUSE
(7) briefly in the
SEARCH
(7)
(44)