Quick Start - Panasonic NV-GS40 Operating Instructions Manual

ª To View the Recorded Scene while the
Recording Is Paused (Camera Search)
The recorded scene can be viewed by keep
pressing the [SEARCHj] Button
(9)
[SEARCHi] Button
Mode.
BACK
SEARCH
LIGHT
(7)
≥When the [SEARCHj] Button is pressed,
images are played back in the reverse direction.
≥When the [SEARCHi] Button is pressed,
images are played back in the forward direction.
ª To Finish the Recording
Set the [OFF/ON/MODE] Switch
≥For other notes concerning this item, see
ª To Add a Sound while Recording
With the supplied Free Style Remote Controller
with Mic connected to the [REMOTE] Socket
you can add a narration while recording is in
progress.
While the [TALK] Button
Indication is displayed and the sound is recorded
from [MIC] (80) .
(80)
(84)
≥While the [TALK] Button is pressed, the built-in
microphone does not operate.
ª Recording Yourself
By opening the LCD Monitor and rotating it
frontward (to the lens side), you can let the
subject in front of the Movie Camera monitor the
shot while recording is in progress.
≥When the LCD Monitor is opened, the
Viewfinder is disabled automatically. However,
when the LCD Monitor is rotated frontward, the
image is also shown in the Viewfinder.
(7) or
in the Recording Pause
SEARCH
(9)
(43) to [OFF].
(84)
is pressed, the [
REC
Camera Mode
≥If you prefer to have the image on the LCD
Monitor to look like an image in a mirror, set
[SELF REC] on the [OTHER FUNCTIONS1]
Sub-Menu to [MIRROR]. Images are recorded
normally and no left and right reversal occurs.
≥If [MIRROR] is used during self-recording, only
the basic indications, such as the Recording
Indication [
Indication [
Battery Power Indication [x], are displayed.
≥If a general Warning/Alarm Indication [°]
appears, return the LCD Monitor to the original
position in order to check the specific content of
the Warning/Alarm Indication.

Quick Start

By pressing the [QUICK START] Button
the Movie Camera will be ready for recording in
approximately 1.3 seconds after the Movie
Camera is turned on.
.
-54- 1
Press the [QUICK START] Button
≥The Quick Start Recording Lamp
up.
(24) ,
(41)
QUICK
]
START
(42)
2
Set the [OFF/ON/MODE] Switch
[OFF].
≥The Quick Start Recording Lamp remains lit.
(43)
3
Set the [OFF/ON/MODE] Switch
≥The Movie Camera will be ready for recording
in approximately 1.3 seconds.
≥For other notes concerning this item, see
-19-
] (Red) or [¥], Recording Pause
] (Cyan) or [¥;] and Remaining
(41) , and
(41) .
(42)
lights
(43) to
(43) to [ON].
.
-54-