Vcr Mode - Panasonic MultiCam PV-DV202-K Operating Instructions Manual

Digital Features
Dual Digital Electronic Image
Stabilization System (D.E.I.S.)
This feature helps compensate for any
unintentional hand or body movement. It
can be used in both the Recording and
Playback (VCR) modes.
Note
• Other Digital Functions are turned off
automatically when the EIS and Digital
Zoom are selected.
NORMAL
1, A
POWER
3
REC/PAUSE
2, 4, C, D
42
DV202_402-K.p 40-43.p65
CAMERA mode
1
Set POWER to CAMERA.
2
Press EIS to stabilize the picture.
• Picture flicker may be observed when
taping under fluorescent lighting
conditions.
• The EIS indicator flashes when the
light level is inadequate.
• Turn D.E.I.S. OFF during recording
when using a tripod.
3
Press REC/PAUSE to start recording.
4
Press EIS again to cancel.
EIS ON
• Be sure that D.E.I.S. is turned off
when not needed.
D.E.I.S. may not function when...
• Palmcorder movement is too
extreme.
• Recording a subject with distinct
horizontal or vertical stripes.
• Recording in low light situations.
• Recording a subject under a great
amount of fluorescent light.
• Recording a scene with very fast
motions.

VCR mode

A
Set POWER to VCR.
B
Press
B
PLAY
C
Press EIS to stabilize the picture.
D
Press EIS again to cancel.
• Be sure that D.E.I.S. is turned off
Note
• When using D.E.I.S in VCR mode, the
EIS
image size is slightly larger.
42
(PLAY) to start playback.
when not needed.
2003/06/12, 10:15