Table of Contents
Advertisement
≥The Shutter Chance Mark appears even when
the [PHOTO SHOT] Button is not pressed.
Check it for your reference.
≥Even if the [PHOTO SHOT] Button is pressed
halfway, the Shutter Chance Mark does not
appear in Manual Focus Mode.
Selecting the Size of Photoshot Images
1
Tape Recording Mode:
Set [TAPE RECORDING MENU] >> [CARD]
>> [PICTURE SIZE] >> [1280k960] or
[640k480].
Card Recording Mode:
Set [CARD RECORDING MENU] >> [CARD]
>> [PICTURE SIZE] >> [2288k1728],
[1600k1200], [1280k960] or [640k480].
STILL
ENTER
(16)
FADE
MENU
Selecting the Quality of Photoshot Images
1
Set [TAPE RECORDING MENU],
[TAPE PLAYBACK MENU] or
[CARD RECORDING MENU] >> [CARD] >>
[PICT QUALITY] >> a desired image quality.
STILL
ENTER
(16)
FADE
MENU
ª Continuous Photoshot
The still pictures can be recorded on a Card at a
regular intervals.
≥Available only with [640k480] picture size.
1
Set [CARD RECORDING MENU] >> [CARD]
>> [BURST MODE] >> [ON].
STILL
ENTER
(16)
FADE
MENU
≥The [
] Indication appears.
82
Recording Mode
2
Keep pressing the [PHOTO SHOT] Button
(52)
.
(52)
≥You can also activate Continuous Photoshot
Function after pressing the [PHOTO SHOT]
Button halfway. In this case, if the Image
Stabilizer Function (
Image Stabilizer Function works more
effective.
≥When [ON] is selected, the still pictures can be
recorded in approximately 0.7 second intervals
until the [PHOTO SHOT] Button is released or
10 pictures are recorded. (You cannot use the
Continuous Photoshot function if the shutter
speed is set to 1/2, 1/3, 1/6 or 1/12.)
≥For other notes concerning this item, see
Quick Start
By pressing the [QUICK START] Button
the Movie Camera will be ready for recording in
approximately 1.7 seconds after the Movie
Camera is turned on.
1
Press the [QUICK START] Button
≥The Quick Start Recording Lamp lights up.
(45)
QUICK
2
Set the [OFF/ON] Switch
≥The Quick Start Recording Lamp remains lit.
3
Set the [OFF/ON] Switch
≥The Movie Camera will be ready for recording
in approximately 1.7 seconds.
To Cancel the Quick Start
Keep the [QUICK START] Button pressed for
approximately 2 seconds and make sure the
Quick Start Recording Lamp is not lit.
≥For other notes concerning this item, see
PHOTO
SHOT
) is set to [ON], the
-84-
START
(48)
to [OFF].
ON
(48)
(48)
to [ON].
.
-114-
(45)
, and
(45)
.
.
-115-
Advertisement
Table of Contents
