Panasonic ICX User Manual page 41

Message Key ID Code
4. Enter:
Note: The ID code may contain up to 16 digits and contain 0, 1-9, *, #, pause (REDIAL
key).
• To clear an entry or existing data, press the FL/R key.
5. To set additional Message Key ID codes, press the
HOLD
arrow or to move to the desired extension.
6. Repeat steps 4-5 until all Message Key ID codes are set.
MEMORY PROG
7. Press to return to "81-User Maintenance" (step 1).
OR...
MEMORY ON/OFF
Press to exit User Maintenance.
Name Assignments
To set extension names using either a large-display or
small-display phone:
1. Enter "User Maintenance" by pressing
03 HOLD HOLD HOLD
2. Enter: and press
Extension Number
3. Dial the and press
Extension Name
4. Enter: :
• If using a large-display phone, press the soft key next to the desired row of letters.
• If using a small-display phone press the appropriate one-touch key.
Note: Press the FL/R key to clear any existing data
5. Use the bottom row of FF keys to select a single letter.
Notes:
• Press the * key to erase a single entry.
• Press the # key to enter a space.
6. Repeat steps 4-5 as many times as necessary to enter the desired speed dial
name.
Note: Press the FL/R key to clear the entire entry.
HOLD
7. Press to store the entry.
8. To set additional extension names, press the
HOLD
to move to the desired SSD.
ICX-45-750 ICX (International), issued June 2000
2. Setting Up Your Phone
HOLD
and press to store the entry.
VOLUME
up or down
ON/OFF PROG * * CONF
.
HOLD
.
VOLUME
up or down arrow or
41