Panasonic ICX User Manual page 38

2. Setting Up Your Phone
Caller ID Call Log
To set or assign Caller ID Logging for an extension using
either a large-display or small-display phone:
1. Enter "User Maintenance" by pressing:
10 HOLD HOLD
2. Enter: , press , and enter:
HOLD Extension Number
3. Press , dial the
the entry.
4. To set CID Log for additional extensions, press the
HOLD
arrow or to move to the desired extension.
5. Repeat step 3 until all extensions are entered.
MEMORY PROG
6. Press to return to "81-User Maintenance" (step 1).
OR...
MEMORY ON/OFF
Press to exit User Maintenance.
Day/Night System Mode
To set the Day of Week modes using either a large-display
or small-display phone:
1. Enter "User Maintenance" by pressing:
07 HOLD 3
2. Enter:
, press , enter: , and press
(0 - no pattern, 1 - pattern 1, 2 - pattern 2, 3 -
3. Enter pattern:
pattern 3)
for the first Sunday and press
Note: To clear an entry or existing data, press the FL/R key.
4. To set additional Day of Week modes, press the
HOLD
or to move to the desired mode.
5. Repeat steps 4-5 until the remaining days in the month are set.
Note: Entry positions are listed in Section 700 - Feature Operations.
MEMORY PROG
6. Press to return to "81-User Maintenance" (step 1).
OR...
MEMORY ON/OFF
Press to exit User Maintenance.
38 ICX (International), issued June 2000
ON/OFF PROG * * CONF
Log Control Number
.
HOLD
, and press to store
VOLUME
up or down
ON/OFF PROG * * CONF
HOLD HOLD
.
HOLD
to store the entry.
VOLUME
up or down arrow
ICX-45-750