To Replace The Staple Cartridge In The Finisher Fs-514 - Konica Minolta BIZHUB C250P User Manual

Replacing consumables

To replace the staple cartridge in the Finisher FS-514

1
Open the front door.
2
Remove the staple cartridge holder.
– Pull the staple cartridge holder
toward you to remove it.
– Only touch the blue parts of the
staple cartridge.
3
Remove the empty cartridge from
the staple cartridge holder.
4
Load the new staple cartridge into
the staple cartridge holder.
– Do not remove the remaining
staples, otherwise the machine
will not be able to staple after the
cartridge is replaced.
bizhub C250P (Phase 3)
7
7-15