Konica Minolta BIZHUB C250P User Manual page 107

Setting up the printer driver
Conditions when the Peer to Peer Printing Tool must be installed while using
Port 9100
Driver type
Konica Minolta
PCL
Konica Minolta
PostScript
PostScript PPD
*1
If the printer driver is installed using the installer while this machine is
connected to the network, the required Peer to Peer Printing Tool is also
installed automatically, and Port 9100 is created.
*2
The printer driver is not compatible with the operating system.
*3
Installing the printer driver using the installer is not applicable.
*4
Not required since standard operating system functions are used.
To obtain the Peer to Peer Printing Tool, consult the dealer where you
purchased this machine.
To specify the driver settings when installing the Peer to Peer Printing Tool,
refer to "Port 9100 printing (Windows 98SE/Me/2000/XP/Server 2003)" on
page 3-44.
When using SMB printing, you can perform network printing without
installing software such as the Peer to Peer Printing Tool. For details, refer to
"SMB printing" on page 3-39.
Reminder
Before setting up network printing, install the printer driver. For details on
installing the printer driver, refer to "Installing the printer driver" on
page 3-6.
To perform network printing, change the printer port for the installed
printer driver to one for a network connection, and then change the
settings on this machine as necessary. For an IPP connection, it is
necessary to install the printer driver first.
bizhub C250P (Phase 3)
Operating System
Windows 98SE/Me
Using installer Not using in-
staller
*1
Not required Required
*2
-
*3
- Required
Windows 2000/XP/2003
Using installer Not using in-
staller
*4
Not required
*2
-
3
3-33