Konica Minolta BIZHUB C250P User Manual page 110

3
5
Specify settings for "TCP/IP Setting" and "IP def. method".
– Touch [+] or [,] to display the setting, and then touch [)] to switch
to the setting display. To change the setting, press the [+] or [,]
key.
To enter a numeric value, press the [+] or [,] key to change the
number of one digit at a time, and press the [*] or [)] key to move
to a different digit. After entering all digits, press the [Menu/Select]
key.
– TCP/IP Setting: Select whether or not TCP/IP is used.
– IP def. method: Select whether the "Auto Input" or "Direct Input"
method is used to specify the IP address. If "Direct Input" is
selected, specify settings for "IP Address", "Subnet Mask", and
"Default Gateway".
3-36
Setting up the printer driver
bizhub C250P (Phase 3)