9
–
If the punch kit is installed, pull
out the hole-punch waste
container FN3.1.
4
Return guide FN3 to its original position.
–
If the punch kit is installed, insert the hole-punch waste container
FN3.1 into its original position.
5
Turn dial FN4 to feed the paper, open
the transport unit cover, and then
pull out any paper.
6
Turn dial FN5 or dial FN6, and then
pull out any paper.
7
Open the misfeed-clearing door, and
then pull out any paper.
9-52
Troubleshooting
bizhub C250P (Phase 3)