Electrostatic Charger Wire - Konica Minolta BIZHUB C353P User Manual

14
14.1.3

Electrostatic charger wire

If the electrostatic charger wire is dirty, streaks will appear though the printed images. If this occurs, follow
the procedure described below to clean the electrostatic charger wire.
1
Open the machine's front door.
2
Slowly pull out the charger-cleaning tool as far as possible.
Next, slowly push in the charger-cleaning tool as far as
possible.
Repeat the above operations three times.
3
Securely insert the charger-cleaning tool, and then close the front door.
14-4
Care of the machine
bizhub C353P