Printing Items; Paper Settings Menu - Konica Minolta BIZHUB C353P User Manual

Settings for control panel

Printing items

When documents, one document from one box, are selected in the Job Operation Menu, the printing-related
menu appears.
Menu
Print
Simplex/Duplex
Number of Copies
Center Staple Pos
Half-Fold Pos.
Note
[Binding Position] is displayed when "Center Staple and Fold" is specified for the printer driver.
[Fold Position] is displayed when "Fold" is specified for the printer driver.
Settings for [Center Staples Pos] and [Half-Fold Pos] vary depending on the finisher installed. When
FS-609 is installed, the values for position adjustment can only be specified. When FS-519 is installed,
the values for position adjustment can be specified for each paper size or paper type.
10.3.2

Paper Settings Menu

Menu
Bypass
Tray1-4
LCT
Note
The paper tray to be displayed differs depending on the installed options.
Among the Paper Settings value, values marked with "-R" represent that the papers are set in the
transversal direction, and values marked with "W" represents the wide papers.
When "Custom Size" or "Wide Paper Size" is selected for [Paper Size] of [Bypass], specify a paper size
using a numeric value.
bizhub C353P
Description
Start printing.
Specify "2-Sided" or "1-Sided".
Specify the number of copies.
Adjust the center binding position.
Adjust the center folding position.
Description
Paper Size Select the size of paper loaded in Bypass.
Paper Type Select the type of paper loaded in Bypass.
Wide Paper Size Specify when using wide paper.
Paper Type Select the type of paper loaded in Tray1-4.
Paper Type Select the type of paper loaded in LCT.
10
Default Setting
–
1-Side
001
0
0
Default Setting
Auto Detect
Plain Paper
OFF
Plain Paper
Plain Paper
10-15