Konica Minolta BIZHUB C353P User Manual page 530

17
13
Disconnect this device from this USB port of the computer.
14
Turn off the machine with the power switch, connect this device, and then turn on the machine with the
power switch.
!
Detail
PageScope Data Administrator is equipped with a batch copy feature that allows the registered user
data to be specified on multiple machines specified to be used with this device.
Note
When the machine is turned off, then on again with the power switch, wait at least 10 seconds to turn
the machine on after turning it off. The machine may not operate correctly if it is turned on immediately
after being turned off.
Hold the plug when plugging and unplugging the USB cable, otherwise the cable may be damaged.
17-14
Authentication unit (IC card type AU-201)
bizhub C353P