Konica Minolta BIZHUB C252P User Manual page 235

Specifying printer driver settings
Note
For the functions and settings that can be specified, refer to "Settings"
on page 4-85.
"Fold and Staple" cannot be specified if "Staple" or "Punch" has been
selected.
The available center binding and folding settings differ depending on the
finisher that is installed. When FS-514 is installed, in addition to "Fold and
Staple" (which folds the documents in half before stapling them), "Center
Staple" (which binds documents with staples at the center) and "Fold"
(which folds documents in half) are available. When FS-603 is installed,
only "Fold & Staple" is available.
The number of staples that can be selected varies depending on the
finisher that is installed.
When optional finisher FS-501 is installed, "1 staple" can be set. When
optional finisher FS-603 or FS-514 is installed, "1 staple" or "2 staples"
can be set.
Note
"Staple" is available only if the optional finisher is installed.
"Punch" is available only when optional finisher FS-603 and punch kit
PK-501 are installed or when optional finisher FS-514 and punch kit PK-
510 are installed.
"Fold and Staple" is available if optional finisher FS-603 or if saddle
stitcher SD-503 is installed on optional finisher FS-514 is installed.
"Center Erase" is available only if finisher FS-603 is installed.
bizhub C252P
4
4-91