Table of Contents
Advertisement
Troubleshooting guide
g DAB
DAB reception is poor
•
Keep the antenna away from computers, televisions, other
cables and cords.
•
Use an outdoor antenna (➡ page 4).
"DATA"
•
Data broadcast being received over the DAB broadcast
signal, cannot be used on this unit.
"SCRAMBLED"
•
The broadcast station being received cannot be accessed.
"NO SERVICE"
•
The station is currently not broadcasting.
"NO SIGNAL"
•
This station cannot be received. Check your antenna
(➡ page 4).
"SCAN FAILED"
•
Stations are not receivable. Check your antenna and try Auto
scanning (➡ page 4, 12, 13).
"STATION FULL"
•
DAB station memory is full. Use the following method to clear
station memory.
Press [DAB MENU].
Press [e,r] to select "STATION CLEAR".
Press [OK]. "OK? Push OK" is displayed.
Press [OK].
Station memory is erased and the unit automatically begins
Auto scanning.
Memory reset (Initialization)
When the following situations occur, reset the memory:
•
There is no response when buttons are pressed.
•
You want to clear and reset the memory contents.
To reset memory
Disconnect the AC mains lead. (Wait for at least 3 minutes before proceeding to step 2.)
While pressing and holding down [8] on the main unit, reconnect the AC mains lead.
"--------" appears on the display.
Release [8].
All the settings are returned to the factory preset. You will need to reset the memory items.
Maintenance
g Pull out the power plug from the outlet for maintenance
beforehand and then wipe it using a soft and dried cloth.
•
When dirt is heavy, wring the cloth moistened in water tightly
to wipe the dirt, and then wipe it with a dried cloth.
•
Do not use solvents such as benzine, thinner, alcohol and
detergent, which may deform the coating of the outer case.
•
When using a chemical cloth, follow the precautions.
18
(continued)
g iPod/iPhone
iPod/iPhone does not turn on
•
Verify that the iPod/iPhone battery is not depleted before
connecting it to the unit.
•
Before inserting the iPod/iPhone into the dock, turn both the
unit and the iPod/iPhone off. Turn the power on and select
the appropriate source.
No sound is heard from the speakers
•
The iPod/iPhone is not inserted correctly into the dock. Turn
the iPod/iPhone off and remove it from the dock connector.
Reinsert it and turn it on again.
•
Make sure that the iPod/iPhone is actually playing something.
•
Adjust the volume.
Distorted sound or the sound level is too low
•
Make sure the equalizer function of the iPod/iPhone is turned
off.
iPod/iPhone cannot be controlled by the remote control or
main unit
•
Make sure the iPod/iPhone is inserted properly into the dock.
•
Check the dock connection and make sure that iPod/iPhone
is selected as the source of music (➡ page 15).
iPod/iPhone does not charge
•
Check all connections (➡ page 4, 15).
g Care on the CD lens
•
Clean the lens regularly to prevent malfunctions. Use a
blower to remove dust and a cotton swab if it is extremely
dirty.
•
Do not use the lens cleaner of the CD type.
Hide quick links:
Advertisement
Table of Contents
