Using the Utility Mode
Density Level Priority (Manual)
Set the default value of the density level for the Manual exposure mode.
The image becomes lighter toward a smaller number and darker toward a
larger number, with "3" as the central value.
G
The default value is "3".
Output Priority
Choose the output function to be selected automatically when power is
turned ON or panel reset from among "Non-Sort", "Sort", or "Group".
G
The default value is "Non-Sort".
Crisscross Mode
Select whether to enable or disable crisscross stacking when the
conditions for crisscross stacking are met.
G
The default value is "Enabled".
4in1 Copy Order
Select the copying order in the 4in1 mode from among the following two
patterns:
G
The default value is "Pattern A".
Book Binding Position
Select whether to let the copier scan the left-hand-side page (Left-bound)
or the right-hand-side page (Right-bound) first when it scans an open
book.
G
The default value is "Left-bound".
Margin Setting
Choose the width of the image shift to be set in the copy in the range
between 0 mm and 20 mm (in 1-mm increments).
G
The default value is "10 mm".
Konica 7115/7118
1 2
3 4
Pattern A
1 3
2 4
Pattern B
7
7-7