Storing A Job - Konica Minolta 7115 Operating Instructions Manual

7
7.7

Storing a Job

You can store frequently used job settings in memory to call up later for
quick job setup. Up to two different settings can be stored: job 1 (Jb1) and
job 2 (Jb2).
Note
No jobs can be stored while the copier is warming up or is in the
Interrupt mode.
Job Storing Procedure
1
Set up the job you want to store in memory.
2
Press the [JOB STORE] key.
3
Check that "Jb1" appears on the
Display.
If you want your job stored as "Jb2",
show it on the Display.
? Do you know how to change the
contents of the Display?
➜ Each time the [JOB STORE] key
is pressed, the Display alternates between "Jb1" and "Jb2".
? Do you know what happens if another job has already been stored
in the job number selected?
➜ Storing a new job will erase the old one.
7-30
Using the Utility Mode
Konica 7115/7118