Power Save; Auto Shut Off; Auto Copy Start - Konica Minolta 7115 Operating Instructions Manual

3

Power Save

Instead of turning OFF the copier, it can be set into a standby state (Power
Save mode).
To set the copier into the Power Save mode, press the [POWER SAVE]
key. In addition, if the copier is not used for a set length of time, it will
automatically enter the Power Save mode. The default length of time is
15 min.
To cancel the Power Save mode, press any key on the control panel.
Note
If the Auto Shut OFF function is activated while the copier is in the
Power Save mode, the copier will automatically turn itself OFF.
Tip
The length of time before the copier enters the Power Save mode can
be set between 1 min and 240 min.
For more details, refer to "User's Choice" (p.7-2, p.7-8).

Auto Shut OFF

If a set length of time elapses after the copier has been operated last, the
copier is designed to automatically turn itself OFF to save energy. The
default length of time is 30 min.
Tip
The length of time before the Auto Shut OFF function is activated can
be set between 15 min and 240 min. The Auto Shut OFF function can
even be disabled. For more details, refer to "User's Choice" (p.7-2,
p.7-8 and p.7-26).

Auto Copy Start

If a document is loaded and the [START] key is pressed during the period
after the copier has been turned ON but before it is ready to make copies,
the copier will automatically start the copy cycle as soon as it completes
the warm-up cycle.
3-18
Before Making Copies
Konica 7115/7118