Preparations For Installing The Window Kit; Attach The Window Panel To The Window Panel - EdgeStar AP13000W Owner's Manual

Warning: Please follow
the installation instructions
carefully to avoid personal
injury or damage.
EdgeStar Portable Air Conditioner

Preparations for installing the window kit

You must vent your portable air conditioner when running in it
cooling mode. Your unit includes a window exhaust kit that can be
used to vent the unit out a window.
Before you begin, make sure you have all the parts necessary for
installation.
If you have multiple windows, choose one that is near an electrical
outlet that will be able to provide sufficient power to your unit. See
the power requirements listed on the product label printed on the
back of your portable air conditioner.
Your window kit can be installed on a horizontal or vertical sliding
window as shown in the pictures below.

Attach the window panel to the window panel

If the inner width of the window is less than 21" (530 mm) wide:
1) Remove the adjustment panel from the window panel, and cut
the window panel to the same width as the panel.
2) Open the window sash and place the window panel on the
windowsill.
3) Secure the window panel to the windowsill.
If the inner width of the window is between 21" (530 mm) and 39"
(1000 mm) inclusive:
1) Open the window sash and place the adjustable window panel
on the windowsill.
2) Slide the adjustment panel to fit the window frame width.
3) Secure the panel to the windowsill with four large wood screws.
4