Setting The Temperature; Turbo Mode; Timer (Delayed Switch On/Off) Function - EdgeStar AP13000W Owner's Manual

Setting the Temperature

Turbo Mode

Timer (Delayed Switch
ON/OFF) Function
11
To set the temperature in cooling mode, use the Minus and Plus
buttons on the remote. The temperature range is 61° to 86°
Fahrenheit. Adjust the temperature until you reach your desired
setting.
In this mode, the air conditioner is set to run at the lowest
temperature 61°F and high fan speed. To activate this function
mode, press the TURBO button on the remote control ONLY.
This function mode enables a delayed switch ON or OFF for this air
conditioner. The time (hours) delay can be set, enable, and
disabled from the both the remote control and control panel.
SETTING DELAYED SWITCH ON TIMER FROM REMOTE
CONTROL
Switch on the air conditioner, select the function mode (cooling/ fan only /
dehumidifying only), set temperature and fan speed. Then switch off the
unit. To activate the delayed switch on function, press the ON timer
button and set the desired time delay ON hours (from 1 to 12 hours) by
pressing the ON timer button. Once the delayed switch on timer is set,
press the SET timer button to confirm the setting. The symbol and the
delay countdown timer will appear on the remote control display. When
the delay time set has elapsed, the air conditioner switches on with last
selected settings. To cancel the delayed switch on function, press timer
button until symbol disappears on the display.
SETTING SWITCH ON TIMER FROM CONTROL PANEL
Switch on the air conditioner, select the function mode (cooling/ fan only /
dehumidifying only), set temperature and fan speed. Then switch off the
unit. Press the Timer button and set the desired time delay ON hours
(from 1 to 12 hours) by pressing the + and – buttons. Once the delayed
switch on timer is set, press the Timer button to confirm the setting. The
symbol and the delay countdown timer will appear on the control panel
display. When the delay time set has elapsed, the air conditioner switches
on with last selected settings. To cancel the delayed switch on function,
press Timer button until symbol disappears on the display.
SETTING SWITCH OFF TIMER FROM REMOTE CONTROL
With the air conditioner operating in any function mode, press the OFF
timer button then set the desired time delay OFF hours (from 1 to 12
hours) by pressing the OFF timer button. Once the delayed switch off
timer is set, press the SET timer button to confirm the setting. The symbol
and the delay countdown timer will appear on the remote control display.
When the delay time set has elapsed, the air conditioner switches off. To
cancel the delayed switch off function, press until symbol disappears on
the display.
SETTING SWITCH OFF TIMER FROM CONTROL PANEL