Table of Contents
Advertisement
BEFORE YOU START
BEFORE YOU START
Thank you for choosing our product.
It is important to perform the upgrade according to the procedure outlined in the Installation Guide for
upgrade. The machine can then be used as outlined in this upgrade Instruction and Reference Guide. To
obtain the best performance from the machine and to ensure safe and correct operation, please read this
Instruction and Reference Guide carefully before you start.
The cutwork functions can be used after the upgrade has been installed and certified. Use the machine after
checking that KIT CW has been certified.
For the procedure on installing and certifying KIT CW, refer to the Installation Guide for upgrade.
The descriptions in this Instruction and Reference Guide show the screens for the 10-needle machine with
Embroidery Upgrade Kit I certified. The settings and operations may differ slightly depending on your machine
model or version.
10-needle machine
NEW FEATURES
■ Fabric can be cut if cutwork needles are installed in specific needle bars of the machine. This
allows embroidering and cutting to be done with the same machine. (page 4)
■ Embroidering and cutting can be done by importing embroidery data (PES format) that includes
a cutwork pattern. (page 4)
Enjoy creating cutwork designs immediately after you upgrade your machine, using the enclosed CD-ROM (for
machines) that contains 30 cutwork patterns. (page 10)
Cutwork can also be created by designing an original pattern using Palette Version 9.2 with Cutwork, then
importing it into your machine.
■ From the machine, an embroidery pattern can be edited so that it will be cut out or sewn with
satin stitching. (page 18)
When creating an appliqué from an embroidery pattern, the appliqué piece can be cut out. (page 20)
The embroidery pattern can be cut out along its outer boundary. (page 23)
The embroidery pattern can be sewn with satin stitching along its outer boundary, then cut out. (page 24)
2
6-needle machine
Advertisement
Table of Contents
