Cutting Around An Embroidered Pattern - Baby Lock BNCW Instruction And Reference Manual

USING THE MACHINE TO POSITION EMBROIDERY PATTERNS FOR CREATING CUTWORK
c
Continue the procedure starting with
step d in "Creating an appliqué with the
outline around a pattern" on page 20.
Memo
• An appliqué piece can be created along a
desired shape around the embroidered
pattern even when Cutwork mode is turned
off. With Cutwork mode turned off, the
cutting line "APPLIQUE MATERIAL" is
embroidered, instead of it being cut out.
Cutting Around an Embroidered
Pattern
3 3
■ Cutting the fabric along the outline
of a pattern
a
Follow steps a and
appliqué with the outline around a pattern"
on page 20.
b
Touch , and make sure
highlighted.
With the "Cutting Line Distance" keys, specify the
distance of the cutting line from the embroidery
pattern.
b
a
b in "Creating an
is
c
a Cut key
b Outline tab
c Cutting Line Distance keys
d Distance between cutting line and pattern edge
Note
• Grayed-out keys are unavailable for use in
this operation. Available keys vary
depending on the cutout design and the
specified settings.
Memo
• "Cutting Line Distance" can also be
specified on page 2 of the Settings screen.
c
Continue the procedure starting with
step d in "Creating an appliqué with the
outline around a pattern" on page 20.
■ Cutting the fabric along the outline
of a desired frame shape
a
Follow steps a and
appliqué with the outline around a pattern"
on page 20.
b in "Creating an
23