Table of Contents
Advertisement
USING THE MACHINE TO POSITION EMBROIDERY PATTERNS FOR CREATING CUTWORK
d
Press
.
→ The following messages appear.
e
Check the displayed preview, and then
touch
if it is acceptable.
If desired distance is not acceptable touch
c
and repeat step
.
→ The embroidering settings screen appears again.
Memo
• Touching
in the embroidering settings
screen after specifying the settings clears
all settings and edited data described
above.
• An appliqué piece can also be created by
using water-soluble stabilizer, instead of
fabric, as the appliqué base. For details on
making an appliqué piece, refer to "Creating
an appliqué piece" in chapter 4 of your
machine's Instruction and Reference Guide.
f
Press
.
→ The embroidering screen appears.
Note
• If necessary, touch
side of the screen to display a preview
image, and then touch
following screen to display an enlarged view
of the pattern, in order to check the pattern
position.
on the top right
on the
21
Advertisement
Table of Contents
