Timer Group; Access Assignment; Areas; Area Status - Bosch Solution 16plus User Manual

2. Select an unused schedule and program the times and
day of the week then assign the schedule to timer group
5.
3. Then under user properties assign the users who you
wish to restrict to timer group 5. Remember that you are
only able to assign a user to one timer group.
A master code holder is able to change the schedules so they
can change the access times for a given user. If a user tries to
operate the system outside their assigned timer group periods
then access will be denied.
Access > User Properties >
Timer Group
This menu is used to assign a User to a Timer Group. Timer
Groups can be used to restrict User access to be within specific
times defined by schedules. Each User can only be assigned to
one Timer Group. Setting this option to 0 will give the User 24
hour access to the system.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [1] + [4] + [4] and select the user from the
list then press [OK].
Ur001 John Smith
Ur002 Debbie Smith
Ur003 User 3 Name
Press 
2. Using the numeric keys, enter the Timer Group. Valid
entries are 1 – 8 or 0 to disable.
Timer Group Ur001
00
Press 0-9 OK to SAVE
3. Press [OK] to save and exit or press [MENU] to exit
without saving.
Access > User Properties >
Access Assignment
This menu allows you to assign each user to one or more access
groups. An access group is used to allow and/or restrict which
users have access to various system outputs. These outputs can
be used to control door strikes, gates or roller doors etc.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [1] + [4] + [5] and select the user from the
list then press [OK].
Ur001 John Smith
Ur002 Debbie Smith
Ur003 User 3 Name
Press 
2. Use the up and down arrow keys to highlight the Access
Group then press the [ON] key to select or the [OFF] key
to deselect.
Bosch Security Systems 03/10 BLCC100U
MENU 1-4-4
OK or MENU
MENU 1-4-5
OK or MENU
 Access Group 1
Access Group 2
Access Group 3

Press
3. Repeat Step 2 until all required Access Groups are
programmed, then press [OK] to save and exit or press
[MENU] to exit without saving.

Areas

The Solution 16 control panel has the ability to be partitioned
Plus
up to 4 individual areas. This section outlines various commands
that control individual areas.
Areas > Commands >
Area Status
This menu allows users the ability view the area status of the
current area or the status of a different area. This menu is only
available via a keypad who's corresponding area is turned off.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [2] + [0] + [0].
A list of available areas will display on the keypad.
A001 Main Office
A002 Production
A003 Warehouse
PRESS

2. Use the [] and [] keys to select the area that you want
to view the status information, then press [OK] to select.
Alternatively, you can enter the area number, then press
[OK]. The keypad will display the area status information.
Main Office A001
Disarmed
Press OK or MENU
If the area is turned All On, the keypad will display:
Main Office A001
Armed All On
If the area is turned Part On, the keypad will display:
Main Office A001
Armed Part On
3. To exit, press [OK].
Solution16
Plus
OK ON OFF MENU
MENU 2-0-0
, OK or MENU
User Guide
13