Call Forward On Number; Call Forward Off Number - Bosch Solution 16plus User Manual

2. Using the numeric keys, enter all the digits of the first
telephone number.
You can change a single digit by scrolling the cursor left
[] and right []. For special characters (eg. , = pause *
or # etc), use the [] and [] keys. To clear all text from the
cursor position to the right, press the [OFF] key.
3. Press [OK] to program telephone number 2.
Domestic Phone Number 2
4331_
Press

4. Using the numeric keys, enter all the digits of the second
telephone number (if required).
You can change a single digit by scrolling the cursor left
[] and right []. For special characters (eg. , = pause *
or # etc), use the [] and [] keys. To clear all text from the
cursor position to the right, press the [OFF] key.
5. Press [OK] to program telephone number 3.
Domestic Phone Number 3
6789_
Press

6. Using the numeric keys, enter all the digits of the third
telephone number (if required).
You can change a single digit by scrolling the cursor left
[] and right []. For special characters (eg. , = pause *
or # etc), use the [] and [] keys. To clear all text from the
cursor position to the right, press the [OFF] key.
7. Press [OK] to save and exit, or press [MENU] to cancel.
Comms > Commands >
Call Forward On Number
When you leave your premises, you no longer need to remember
to manually activate the Call Forward On feature via the
telephone. These addresses allow you to program the Call
Forward On sequence that the Solution 16
automatically use when you turn Area 1 'On' .
In Australia, a typical sequence of activating the Call-Forward On
– After Time (All Calls) is described below:
For other countries please substitute the appropriate commands
after consultaion with your telephone company.
Enter programming mode (PIN + MENU) then,
1. *61 (To turn Call Forward On – After Time).
2. Telephone number that you want calls to go to (e.g.
0416123456).
3. *5# (End of Call Forward sequence after 5 seconds).
Bosch Security Systems 03/10 BLCC100U
0-9 OK to SAVE
0-9 OK to SAVE
MENU 5-1-6
control panel will
Plus
Therefore, you would program as per the following steps to
program the call forward on number as: *610416123456*5#.
1. Enter [MENU] + [5] + [1] + [6].
The keypad will display information for telephone
number 1.
Call Forward On N001
Press

2. Using the numeric keys, enter all the digits of the call
forward on sequence.
You can change a single digit by scrolling the cursor left
[] and right []. For special characters (eg. , = pause *
or # etc), use the [] and [] keys.
3. Press [OK] to save and exit, or press [MENU] to exit
without saving.
Comms > Commands >
Call Forward Off Number
When you enter your premises, you no longer need to remember
to manually disable the Call Forward feature via the telephone.
These addresses allow you to program the Call Forward Off
sequence that the Solution 16
use when you turn Area 1 'Off' .
In Australia, a typical sequence of activating the Call Forward Off
feature is described below:
For other countries please substitute the appropriate commands
after consultaion with your telephone company.
Enter programming mode (PIN + MENU) then,
1. #61 (To turn Auto-Forward After Time - Off).
2. # (End of Call-Forward sequence).
Therefore, you would program as per the following steps to
program the call forward on number as: #61#.
1. Enter [MENU] + [5] + [1] + [7].
The keypad will display the current call-forward off
sequence.
Call Forward Off N001
_
Press

2. Using the numeric keys, enter all the digits of the call
forward off sequence.
You can change a single digit by scrolling the cursor left
[] and right []. For special characters (eg. , = pause, *
or # etc), use the [] and [] keys.
3. Press [OK] to save and exit, or press [MENU] to exit
without saving.
Solution16 User Guide
Plus
0-9 OK to SAVE
MENU 5-1-7
control panel will automatically
Plus
0-9 OK to SAVE
21