New Zone Group - Bosch Plena Software Manual

Plena Voice Alarm System | Software Manual | Zones
4.3.2

New zone group

Proceed as follows:
1 Click the New button. A window similar to the one
in figure 4.2 appears.
figure 4.2: New zone group, step 1
2 Enter the name of the new zone group in the text
box (e.g. Floors) and push the OK button. The
window disappears and the name of the new zone
group is displayed in the Zones window (see figure
4.3 for an example).
figure 4.3: New zone group, step 2
Bosch Security Systems | 2005-10 | 9922 141 10384 en
3 Click the Add zones button to add zones to the zone
group. A window similar to the one in figure 4.4
appears.
figure 4.4: New zone, step 3
4 Put a checkmark in each box of the zones that must
be added to the zone group:
• The All buttons make it possible to put a
checkmark in all boxes of all zones of a unit.
• The Select All button makes it possible to put a
checkmark in all boxes of all zones in the system.
• The Clear All button clears the checkmarks from
the boxes of all zones in the system.
5 Click the Close button to close the Add zones
window. The Zones window (see figure 4.3 for an
example) appears again.
6 Click the Save button to save the changes.
en | 16