Palm TREO PRO User Manual page 85

If you are installing the software on a
TIP
computer at work, make sure your company
allows you to install new software. Contact
your company's IT department for help.
1 Plug the USB cable into an available
USB port on your computer or into a
powered USB hub connected to your
computer.
For best performance, plug your USB
TIP
cable directly into a USB port on your
computer. If your computer has USB ports on
both the front and back, we suggest using the
back port. If you use a USB hub, make sure it's
a powered hub.
2 Connect the USB cable to your
smartphone by inserting it into the
microUSB connector on the bottom of
the smartphone. Setup starts
automatically (this is called "setup
mode").
If the Setup screen does not appear,
NOTE
do the following:
Windows XP: Go to My Computer
•
and open the Treo Setup icon.
Windows Vista: Go to Start >
•
Computer and open the drive named
Treo Setup. If necessary, double-click
setup.exe.
3 On your computer, select Install sync
software on your PC and follow the
instructions that appear on both your
computer and your device.
4 After installation completes, the Setup
window prompts you to start the sync
process. To proceed with syncing and
switch your smartphone from Setup to
S E T T I N G U P Y O U R C O M P U T E R F O R S Y N C H R O N I Z A T I O N
S Y N C H R O N I Z I N G I N F O R M A T I O N
5
85