Data Encryption: Sets the encryption
method. (The options in this list vary
based on your Authentication setting.)
Disabled: Turns data encryption off.
•
WEP: Turns on the Wired Equivalent
•
Privacy encryption method.
TKIP: Turns on the Temporal Key
•
Integrity Protocol encryption method.
This method is often used to encrypt
WPA and WPA-PSK connections.
AES: Turns on the Advanced
•
Encryption Standard protocol. (This
method is often used to encrypt
WPA and WPA-PSK connections.)
The key is automatically provided:
Indicates whether you need to specify
the network key and key index provided
by your system administrator, or
whether the network provides this
information. The availability of these
options varies based on your
Authentication and Data Encryption
settings.
Y O U R C O N N E C T I O N S T O T H E W E B A N D W I R E L E S S D E V I C E S
4 Enter the following settings and press
Finish (right softkey):
Use IEEE 802.1x network access
control: Lets you set these parameters
if required by the network.
EAP type: Specifies the Extensible
Authentication Protocol type.
5 Press OK
.
C O N N E C T I N G T O A W I - F I N E T W O R K
8
169