Advertisement
Available languages
Available languages
(_..o_k
_e_
S_._p
_,L_e _J
_
_s_
_'
Connect water supply line to the water valve under the sink.
Option
2: No waste
disposer
and drain
air gap
B
.......... . _ ..........
_]
A. Hot water supply
2. Slide clamps onto drain hoses (Figure A). Do not cut drain
hoses.
3. Push hoses into Y drain connector until fully seated (Figure
B). Several "clicks" will be heard.
4. Slide clamps into position (figures C and D).
A
D
5. Connect the drain hose using one of the following options:
Option 1: Waste disposer no drain air gap
A
A. Drain hose connector
B. Drain air gap
C. Waste
Option 3: Waste disposer and drain air gap
A. Drain hose connector
B. Drain air gap
C. Waste
Option 4: No waste disposer, no drain air gap
A. For new construction,
remove disposer plug.
B. Connect drain connector
to waste disposer:
C. Tighten clamp.
6=
A. Drain hose connector
B. Cut drain connector
C. Waste
NOTE: Attach the drain hose connector to the water waste
line using the supplied hose clamp.
Turn on water and check for leaks.
11
Advertisement
