Minolta Di181f User Manual page 62

7
Message
SD : NOT STORED
OT : NOT STORED
FILE FULL 1 PAGE TX
UNABLE TO ERASE
OT : NO SUB-ADDRESS
CG : NO SUB-ADDRESS
SD : NO SUB-ADDRESS
ALREADY STORED
UNABLE TO ERASE
RELAY BOX OCCUPIED
Feeder open
Cover open
Warming up FAX ready.
Original document still on
glass
Tray setting
GTX: UNABLE TO FEED
DOCUMENT
10/30 '99 13:45 FAX ready
MX
Holding.
Please wait.
Select BOOK TX.
STORE DOCUMENT
PRESS START.
7-60
Problem
The speed dial key selected has
not been assigned a recipient.
The one-touch key selected has
not been assigned a recipient.
The maximum number of files
has been exceeded.
Attempts were made to erase a
one-touch/speed dial number
which had been stored as a call
group.
The one-touch key selected has
not been assigned a sub-
address.
The call group key selected has
not been assigned a sub-
address.
The call group key selected has
not been assigned a sub-
address.
The box number selected has
already been allocated.
Attempts were made to erase a
one-touch/speed dial or call
group number which had been
stored in a relay box.
ADF open.
Cover is open.
The machine is warming up.
The document is still on the
glass.
The paper tray setting is
incorrect.
Group transmissions are not
possible in 1 page TX mode.
Maintenance required.
STOP was pressed during the
scanning process.
The machine waits for the
printing process to finish.
The selected function is not
available using the ADF.
The document is in the feeder.
Di181f
Troubleshooting
Solution
Store a number.
Store a number.
Send manually or delete a
file.
Enter the correct paper
size.
Enter a sub-address.
Enter a sub-address.
Enter a sub-address.
Select a different box
number.
Delete each number
individually.
Close the ADF.
Close the cover firmly.
Wait a moment.
Remove the document.
Change the paper tray
setting.
Send from memory.
Call the technical service.
Resend.
Wait a moment.
Send the document using
the book transmission.
Press START.
Rev. /