Reception; Manual Reception; Default Reception Setting; Automatic Reception - Minolta Di181f User Manual

Reception

5 Reception
5.1

Manual Reception

Basically manual reception only makes sense if you are expecting voice
calls on the same line. You should keep this in mind when you set the
reception mode. As the machine is not equipped with a telephone
receiver, a separate phone must be attached to the wall outlet of the
telephone line. Only then the manual reception mode is available. Answer
the call and press [START].

Default Reception Setting

1 Press [FUNCTION] and [INITIAL
SET].
2 Press the arrow right key (OT 40)
twice and [ENTER].
3 Use the numeric keypad to select
the required setting and press
[ENTER].

[0] : automatic reception

[1] : manual reception
4 Press [STOP] to terminate the
entry.
5.2 Automatic Reception
Automatic reception is set as default. No further settings are required.
Your fax machine will answer calls after a set number of rings. The Default
setting is 1.
Rev. /
LINE SET
0:AUTO/1:MANUAL
RX MODE
10/21 '98 12:00
FAX Ready.
Di181f
5
<-->/ENTER
<-->/ENTER
<-->/ENTER
5-47