When The Message "Punch Dust Full Please Change" Appears; To Empty The Hole-Punch Waste Container - Minolta CF2002 User Manual
Hide thumbs
Also See for CF2002:
- Service manual (298 pages) ,
- Operation manual (132 pages) ,
- User manual (75 pages)
Table of Contents
Advertisement
5
5.5 When the Message "Punch dust full Please change" Appears
5.5
When the Message "Punch dust full Please
change" Appears
If the punch kit PK-4 is installed in the finisher FN-8, the above message will appear
when the hole-punch waste container is full with punch scraps.
To empty the hole-punch waste container
Empty the hole-punch waste container, and then re-install it according to the
following procedure.
1
Slide the finisher away from the
printer.
2
Pull out the hole-punch waste
container.
5-42
CF2002/CF3102
Advertisement
Table of Contents
