Minolta CF2002 User Manual page 70

5
Message
Low-power mode
Near trouble ## / ##
No staples
No xxxx toner
Call service
No xxxx toner
Please change
Paper jam at
Jx
Punch dust full
Call service
Punch dust full
Please change
Service Code
Cxxxx
Sleep mode
The guides in tray # not set right
To print,
clear 1st tray
To print,
clear elevator tray
Waste toner full
Call service
Waste toner full
Please change
Waste toner
nearly full
Waste toner bottle
not set
5-2
Cause
The printer has entered
Energy Saver mode.
Some malfunction occurred in
the printer.
The staples have run out.
The toner for the indicated color
is empty.
The toner for the indicated color
is empty.
A paper jam or staple jam
occurred at the indicated
location.
The hole-punch waste container
is full.
The hole-punch waste container
is full.
An error occurred.
The printer has entered Sleep
mode.
The size of the paper loaded into
tray # is incorrect.
The upper paper output tray of
the finisher is full of paper.
The lower paper output tray of
the finisher is full of paper.
The waste toner bottle is full.
The waste toner bottle is full.
The waste toner bottle will soon
be full.
The waste toner bottle is not
installed.
5.1 Message List
Action
• To cancel Energy Saver
mode, send a print job, or
open and close a cover.
• To change the time for the
printer to enter Energy Saver
mode, see "To set the Engine
Setup Items" on page 3-13.
Contact your technical
representative and inform them
of the error code. (See p. 5-46)
Replace the staple cartridge.
(See p. 5-8)
Ask your technical representative
to replace the toner cartridge for
the indicated color.
Replace the toner cartridge for
the indicated color. (See p. 5-4)
Remove the jammed paper or the
jammed staple. (See p. 5-16)
Ask your technical representative
to empty it.
Please empty it. (See p. 5-42)
Contact your technical
representative and inform them
of the error code. (See p. 5-44)
• To cancel Sleep mode, send a
print job, or open and close a
cover.
• To change the time for the
printer to enter Sleep mode,
see "To set the Engine Setup
Items" on page 3-13.
Load paper of an appropriate
size into tray #.
Remove paper from the upper
paper output tray.
Remove paper from the lower
paper output tray.
Ask your technical representative
to replace the waste toner bottle.
Replace the waste toner bottle.
Replace the waste toner bottle as
soon as possible.
Install the waste toner bottle.
CF2002/CF3102