5
5.3
When the Message "No Staples" Appears
When finisher FN-116 or FN-8 is installed and is about to run out of staples, the
message shown above appears.
Follow the procedure below to replace the staple cartridge.
Note
Be sure to replace the staple cartridge only after the message appears,
otherwise the machine may be damaged.
To replace the staple cartridge for FN-116
1
Slide the finisher away from the
printer.
2
Turn the dial to the left in order to
position the stapler at the center.
5-8
5.3 When the Message "No Staples" Appears
CF2002/CF3102