Print Tab - Minolta CF2002 User Manual

8.4 User Mode

Print Tab

The [Print] tab is used to configure the printer controller.
Default Setting
This screen appears when you click the [Default Setting] menu on the [Print] tab.
Clicking a sub-menu under the [Default Setting] menu displays various setup
screens for the printer.
General Setting
This screen appears when you click the [General Setting] sub-menu under the
[Default Setting] menu. The screen is used to specify the default settings of the
paper feed tray, duplex printing, and the number of copies.
Input Tray:
Duplex:
Copies:
[Apply] button:
[Clear] button:
CF2002/CF3102
From the drop-down list, select the default paper feed tray. If the
device receives a print job that does not specify the paper feed
tray, the default paper feed tray is used.
Settings: Auto, Tray1, Tray2, Tray3, Tray4, or LCC
From the drop-down list, select whether to perform duplex
printing by default. If you select duplex printing, select whether
to use long edge binding or short edge binding. If the device
receives a print job that does not specify the duplex setting, the
default duplex setting is used.
Settings: Off, Left Binding, or Top Binding
Enter the default number of copies. If the device receives a print
job that does not specify the number of copies, the default
number of copies is used.
Settings: 1 to 999
Click the button to apply the new settings.
Click the button to clear the settings that were entered or
selected.
8
8-13