Noise Emission Levels - Lexmark W01 User Manual

The manufacturer is not responsible for radio or television interference caused by using other than recommended
cables or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could
void the user's authority to operate this equipment.
Note: To assure compliance with FCC regulations on electromagnetic interference for a Class B computing device,
use a properly shielded and grounded cable such as Lexmark part number 1021294 for USB attach. Use of a substitute
cable not properly shielded and grounded may result in a violation of FCC regulations.
Any questions regarding this compliance information statement should be directed to:
Director of Lexmark Technology & Services
Lexmark International, Inc.
740 West New Circle Road
Lexington, KY 40550
(859) 232–3000

Noise emission levels

The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.
Note: Some modes may not apply to your product.
1-meter average sound pressure, dBA
Printing
Scanning
Copying
Ready
Values are subject to change. See www.lexmark.com for current values.
Temperature information
Ambient temperature
Shipping temperature
Storage temperature
Waste from Electrical and Electronic Equipment (WEEE) directive
50 dBA
40 dBA
50 dBA
inaudible
15–32° C (60–90° F)
-40–60° C (-40–140° F)
1–60° C (34–140° F)
Notices
136