Table of Contents
Advertisement
5.5.2
Changing Timer Polling Receiving
Description
1 Press [MENU] 3 times.
2 Press [SET].
3 Press [MENU] to select TIMER POLLING.
4 Press [SET].
5 Press [MENU] to select CHANGE.
6 Press [SET].
7 Press [DELETE] to delete the wrong time.
8 Enter the desired transmission time.
9 Press [SET].
10 Press [DELETE] to delete the wrong
number bit.
11 Enter the desired telephone number by bit.
12 Press [SET]. A beep confirms the entry.
5.6
Memory Receiving
The Minoltafax 1300 receives data in the memory, if the machine runs out
of paper or ink during the reception. In this case the display shows
<Rx. IN MEMORY> alternating with the cause for the problem (PRINTER
ERROR, CHECK PAPER or INK EMPTY).
Solve the problem and press [PRINTER RESET] to resume the print job.
5.6.1
Memory Capacity
The memory has a capacity of approximately 34 ITU test pages No. 1 in
normal resolution. However, as the amount of the received data depends
on the number of dots received for the picture, the capacity of the memory
may be used up earlier. If half tone pictures are received the limit of the
memory can be reached in less than a page. In this case the picture must
be send as a black and white picture.
Minoltafax 1300
R
ECEIVING
Display
3: TIMER ?
TIMER Tx. ?
TIMER POLLING ?
CANCEL ?
CHANGE ?
START TIME
17:00
START TIME
:
START TIME
13:00
PARTY ?
123456
030 1224455
<ABRUFZEIT 13:00>
65
Advertisement
Table of Contents
