Table of Contents
Advertisement
S
ENDING
4.2.3
Dialling Using the Speed Dial
Description
1 Place the document in the document
feeder and adjust the paper guides.
2 If necessary adjust the resolution and the
contrast.
3 Press [SPEED DIAL] and enter the two
digits of the programmed speed dial
number (01 - 40).
4.2.4
Manual Dialling Using the Line Monitor
Description
1 Place the document in the document
feeder and adjust the paper guides.
2 If necessary adjust the resolution and the
contrast.
3 Lift the receiver of the connected
telephone (or press
telephone number.
4 When you hear the signal from the other
party, press [START] and hang up the
receiver.
For any of the dialling methods:
Press [DELETE], to correct wrong entries, move the cursor to the desired
position using [
Press [STOP], to cancel the programming.
If a transmission has already started, you can interrupt it by pressing
[STOP].
54
)and dial the
#
$
] or [
].
Display
STD
NORMAL
STD
NORMAL
0511 234567
Display
STD
NORMAL
STD
NORMAL
0511 234567
***TRANSMITTING***
Minoltafax 1300
Advertisement
Table of Contents
