Table of Contents
Advertisement
12. Troubleshooting
12.1 Selfdiagnostic System
12.2. Recall Copy Count / Periodic Maintenance
COUNTER
This copier is equipped with an integrated selfdiagnostic system. A variety
of information and data is easily recalled, e.g. a reading of the total copy
counter (see below). Detailed information regarding any type of problem
is automatically displayed on the screen.
The following status information will be displayed:
– Periodic maintenance
– Memory overflow
– Call service (electronic problem)
– Paper jam
– Refill toner (for procedure, see page 18)
The system should undergo a routine maintenance after every 250,000
copies. A user instruction prompting you to call the service will be
displayed on the screen. You can easily call up the information, how
many copies have been made since the last PM.
CLEAR
To display the counter list, proceed as follows:
– Press P. The screen will display the counter list as shown above.
– Now press CHECK on the control panel to display the targeted PM
volume and the number of copies produced since the last routine main-
tenance.
– Press the EXIT key to return to the Basic Screen.
– It is also possible to print the counter list. In this case, do not press EXIT
but the Counter list output key. The Basic Screen will appear. Check
that A4 size is selected and start printing by pressing START.
61
Advertisement
Table of Contents
