Table of Contents
Advertisement
6. Before Copying
6.1 Weekly Timer
TIMER
POWER SAVER
ON/OFF
6.2 User Password/ Electronic Key Counter (EKC)
The message on the screen
instructs you to enter a password.
The timer indicator is lit, if the weekly timer is activated in the Konica
7075. In this case, please do not switch the unit on and off at the main
power switch; the machine turns on and off automatically.
Please contact your key operator, if you need to use the system while it is
not running. He can change the ON/OFF timer or interrupt the timer.
Timer Interrupt
While the unit is off over the timer, press the POWER SAVER ON/OFF
key to activate the copier. After entering a special 4-digit off-time code,
press START and specify the duration of the actual on-time (e.g. 2 hours
and 15 minutes). After the specified period, the system will automatically
switch off again.
This system has an integrated electronic key counter, which manages
1000 user accounts. Copies can be allocated to users, accounts or
projects, if the key operator has activated this function. A copy limit can
be allocated to each counter.
If the electronic key counter is activated in this unit, a user password must
be entered to access the machine (also for Job Reservation and after
pressing the INTERRUPT key). Please contact your key operator, if you
need a password or cannot remember your allocated password.
Password Access
– After switching on the system, a request to enter a password is displayed
on the screen.
– Enter your 8-digit code over the key pad and press START.
– If you hit a wrong key, still enter 8 digits in total, and press START.
Now repeat the procedure with the correct code.
– The number of copies made as well as the copy limit for this counter
are now displayed for a moment.
– If the copy limit has been reached for any password, the system will not
produce any further copies under this code. Depending on how the
copier is adjusted, a copy job in progress can either be completed or
will be interrupted.
Disable Access:
After you have finished copying, you should delete your password so that
others cannot make copies on your counter:
– Press the P key and C key simultaneously, until the EKC password
request is displayed again on the screen.
Depending on how the key operator has adjusted the system, the
access will be impossible immediately after having finished the job.
23
Advertisement
Table of Contents
