Table of Contents
Advertisement
9. Special Functions
9.1.4 All Image Area
7075
7075
Original
Normal
Copie
9.1.5 Image Repeat
Originals are copied completely to the edges to avoid image loss.
7075
All Image
Copie
This function lets you fill the copy with repeated small motifs or a defined
portion of an original.
– Press the function key. If you select AUTO, the Non Image Area Erase
function is also active.
– Position the original on the platen glass, and in this case leave the
RADF open.
– Select Vertical/Horizontal, if you want to repeat a portion of an origi-
nal. Use the arrows to specify the width and the height of the original
portion. Both values can range from 10 mm to 150 mm. Press ENTER
REPEAT WIDTH BY KEYPAD, if you want to enter the values from the
touch screen keypad.
– Press one of the function keys for a specific number of repeats of an
original part on the copy. The size of the original part depends on how
many times it will be placed on the copy; the part will be copied same
size.
– Position the original on the platen glass. The specified area is measured
from left to right and from top to bottom.
– An A4 size copy is produced; but you can select a different size if
required.
43
Advertisement
Table of Contents
