Step 4: Connecting The Audio Cords - Sony RDR-HX900 Operating Instructions Manual

Step 4: Connecting the Audio Cords

Select one of the following patterns A or B, according to the input jack on your TV monitor, projector,
or AV amplifier (receiver).
This will enable you to listen to sound.
DIGITAL OUT
COAXIAL
PCM/DTS/MPEG/
DOLBY DIGITAL
OPTICAL
Optical digital cord (not supplied)
[Speakers]
Rear (L)
Front (L)
Centre
: Signal flow
* The yellow plug is used for video signals (page 14).
z Hint
For correct speaker location, see the operating instructions supplied with the connected components.
Note
Do not connect your TV's audio output jacks to the LINE IN (AUDIO L/R) jacks at the same time. This will cause
unwanted noise to come from your TV's speakers.
(red)
(white)
(yellow)*
LINE 2 OUT
R AUDIO L VIDEO S VIDEO
to LINE 2 OUT (R-AUDIO-L)
AERIAL LINE 1 - TV LINE 3 / DECODER
IN
LINE 4 IN DIGITAL OUT
COAXIAL
R AUDIO L VIDEO S VIDEO
PCM/DTS/MPEG/
DOLBY DIGITAL
OPTICAL
OUT
to DIGITAL OUT (COAXIAL or
OPTICAL)
to optical
digital input
AV amplifier (receiver)
with a decoder
(yellow)
Audio/video
cord (supplied)
(white)
(red)
COMPONENT
VIDEO OUT
Y
LINE 2 OUT
P / C
B B
R AUDIO L VIDEO S VIDEO
P / C
R R
DVD recorder
or
Coaxial digital cord
(not supplied)
to coaxial
digital input
A
INPUT
VIDEO
L
AUDIO
R
TV, projector, or AV
amplifier (receiver)
~
AC IN
B
[Speakers]
Rear (R)
Front (R)
Subwoofer
,continued 17