Input Jack - Sony RDR-HX900 Operating Instructions Manual

Connecting to audio L/R input
A
jacks
This connection will use your TV's or stereo
amplifier's (receiver's) two speakers for sound.
Connect using the audio/video cord (supplied).
Yellow
White (L)
Red (R)
• Surround effect (page 56)
TV: Dynamic, Wide, Night
Stereo amplifier (receiver): Standard, Night
Note
Do not connect the LINE 4 IN (R-AUDIO-L) and LINE
2 OUT (R-AUDIO-L) jacks to your TV's audio output
jacks at the same time. This will cause unwanted noise to
come from your TV's speakers.
18
Connecting to a digital audio
B

input jack

If your AV amplifier (receiver) has a Dolby*
Digital, DTS*
digital input jack, use this connection.
Connect using a coaxial or optical digital cord (not
supplied).
Yellow
White (L)
Coaxial cord
Red (R)
Optical cord
• Surround effect
Dolby Digital (5.1ch), DTS (5.1ch), MPEG audio
(5.1ch)
*1
Manufactured under license from Dolby Laboratories.
"Dolby," "Pro Logic," and the double-D symbol are
trademarks of Dolby Laboratories.
*2
"DTS" and "DTS Digital Out" are trademarks of
Digital Theater Systems, Inc.
Notes
• After you have completed connection B, make the
appropriate settings under "Audio Connection" in Easy
Setup (page 22). If your AV amplifier (receiver) has an
MPEG audio decoder function, set "MPEG" to
"MPEG" in Audio Setup (page 92). Otherwise, no
sound or a loud noise will come from your speakers.
• The surround sound effects of this recorder cannot be
used with connection B.
2
, or MPEG audio decoder and a
1