Sony RDR-HX900 Operating Instructions Manual page 87

Corresp- Channel
onding Set
channel number
S39 S42
S40 S43
S41 S44
Station Name
Changes or enters a new station name (up to 5
characters). The recorder must receive channel
information (for instance, SMARTLINK
information) for station names to appear
automatically.
1
Follow steps 1 to 3 of "Using the Setup
Displays" (page 83) to select "Settings" in the
Setup Display.
2
Select "Channel Setting," and press ENTER.
Settings - Channel Setting
System :
Normal / CATV :
Channel Set :
Station Name :
PAY - TV / CANAL+ :
Audio :
3
Press PROG +/– to select the programme
position for which you want to change or enter
a station name.
4
Select "Station Name," and press ENTER.
The display for entering characters appears.
Input Station Name
AAB
1 . , - 1 6
2 A B C 2 Back 7
3 D E F 3 Clear All 8
4 G H I 4 Space 9
5 J K L 5 0
To enter characters, see page 40.
5
Select "Finish," and press ENTER.
PAY-TV/CANAL+
Sets the PAY-TV/Canal Plus channels.
For details, see page 30.
Receivable
Frequency range
(MHz)
443.25–451.25
451.25–459.25
459.25–467.25
Prog. 1
BG
Normal
C3
AAB
Off
NICAM
"A"
M N O 6
"a"
P Q R S 7
Symbol
T U V 8
W X Y Z 9 Cancel
0 Finish
Channel List (Changing/Disabling
the channels)
Changes or disables the programme positions after
setting the channels. If any programme positions
are unused or contain unwanted channels, you can
disable them.
You can also change station names. If the station
names are not displayed, you can enter them
manually.
1
Follow steps 1 to 3 of "Using the Setup
Displays" (page 83) to select "Settings" in the
Setup Display.
2
Select "Channel List," and press ENTER.
Settings - Channel List
Prog Channel
1 C3
2 C5
3 C12
4 C21
5 C23
6 C24
3
Press M/m to select the row containing the
programme position you want to change or
disable.
To change, press ENTER and go to step 4.
To disable, press CLEAR and go to step 6.
The disabled positions will be skipped when
you press PROG +/–.
To display other pages for programme
positions 7 to 99, press M/m repeatedly.
4
Press M/m until the selected channel row
moves to the desired programme position.
The selected channel is inserted at the new
programme position.
Settings - Channel List
Prog Channel
1 C3
2 C12
3 C21
4 C5
5 C23
6 C24
5
Press ENTER to confirm the setting.
6
To change or disable the programme position
of another station, repeat from step 3.
Note
Be sure to correctly select the programme position you
want to disable. If you disable the wrong programme
position by mistake, you need to reset that channel
manually.
Name
AAB
FGH
PQR
Name
AAB
FGH
PQR
,continued 87